Catalogue PDF
Natural mineral clay, zero carbon, 50-year climate resistance. PHOMI eCovering panels clad facades, terraces and cladding with millimetre precision. Three exclusive collections.
PHOMI eCovering is made from authentic modified clay, sourced from nature — no resin, no toxic ingredients. It is a revolutionary substitute for natural stone, tiles and precast concrete, with a carbon footprint reduced by 95.4% compared to tiling and 98.63% compared to stone.
Certified for 18 consecutive years by international authorities, the panels have been tested in extreme climatic conditions — from polar cold to equatorial heat — across 120 countries and more than 60 million m² installed.
Flexible and lightweight, each panel can be curved around columns or arches with gentle pressure. Dual use: exterior facade by day, kitchen or bathroom on the other.
Resistant to bacteria and mould. Fire class A. Resistant to salt spray, freeze/thaw, breathable and lightweight — ideal for ceilings, irregular shapes, bathrooms.
Organic material without resin, certified climate resistance 50 years. Tested in extreme conditions from polar cold to equatorial heat. Anti-fading guaranteed.
eCoverings reduce emissions by 95.4% vs tiling and 98.63% vs natural stone. No resin, no toxic ingredients — authentic modified clay from nature.
High-precision digitisation of rare stones — every vein, every cavity faithfully reproduced. Travertine, Natural Stone, Artstone collections in ultra-thin slabs 2.8 to 3.8 mm.
Round a column, clad an arch, cover a curved ceiling — the material bends under gentle pressure. Installation 3× faster, 83% cheaper to transport than native stone.
From the Burj Khalifa to Starbucks — 237 iconic landmarks chose PHOMI eCovering. Certified 18 consecutive years. Available in Benelux exclusively at Design-Up.
Ideal format for exterior facades and cladding. Easier to shape on curved surfaces, to handle on scaffolding and to cut to size.
Large plank format for wide interior surfaces or large flat facades. Fewer joints, more monolithic result and premium finish.
High-precision digitisation of rare stones from around the world. Ultra-thin slabs 2.8–3.8 mm, anti-fading guaranteed 50 years. Click on a model to view it full screen.
Transform the facade into a coral reef. Intense natural veining, visible cavities. Edge-to-edge installation recommended — monolithic result with no visible joint.
Stellar White
Plain White
Andes Yellow
Vertical linear texture, mineral wood effect. Sairo Light Apricot brings natural ochre warmth, Andes Yellow a sunny hue. Thickness reduced to 2.8 mm — the slimmest in the range.
Sairo Light Apricot
Andes Yellow
Termite-mound texture, natural granular structure. Anna Light Grey offers luminous softness, Nile Dark Grey a sharp graphic depth — ideal for contemporary facades.
Anna Light Grey
Nile Dark Grey
The prestige of marble without the weight. Precise veining digitised in high resolution — Sunis White for a bright interior, Cloud White for milky softness.
Sunis White
Cloud White
Fine-grained natural sandstone, authentic mineral warmth. Greyish Desert brings desert sobriety, Fog a misty lightness.
Greyish Desert
Fog
Ultra-contemporary polished concrete look in Dark Grey. Smooth, satin surface that captures raking light — perfect for industrial architecture, showrooms and office facades.
Dark Grey
Stone hewn in its raw state — bumps and reliefs preserved. Plain White for minimalists, Rock Mottle Brown for rustic styles, Castol Blue for the bold.
Plain White
Rock Mottle Brown
Castol Blue
Deep diagonal veining, pearlescent sheen in Veil Grey. A discreet yet striking module — chevron installation for a sculptural result on large facades.
Veil Grey
Mirror-polished natural stone, timeless Plain White shade. Luxurious look for entrances, atriums and representative facades — light reflections that elevate volumes.
Plain White
Alpine schist digitised in Veil Grey — horizontal strata and crystallised grain. Evokes the mountain massif whilst remaining ultra-light.
Veil Grey
The aesthetic of rust and natural oxidation in Rock Mottle Brown — without ever rusting. Corten trend without maintenance, 50-year PHOMI durability.
Rock Mottle Brown
Contemporary rammed earth — visible layers of compressed clay, bright Plain White. Strong biophilic trend, near-zero carbon footprint.
Plain White
Deep vertical ribs inspired by sandstone cliffs — striking three-dimensional result. Ash Grey for graphic urban facades, Plain White for high-end residential schemes.
Ash Grey
Plain White
Horizontal stone courses in Kamu Yellow — Mediterranean warmth and artisanal finish. The 600×1200 mm portrait format accentuates the verticality of facades.
Kamu Yellow
Mineral origami in Plain White — geometric facets that play with light throughout the day. Square 600×600 mm format, staggered installation recommended.
Plain White
103 references in stock
Access the full gallery — filter by collection, zoom in on each reference.
Coral Travertine, Ghana Travertine, Anthill Travertine — veiné naturel intense, textures linéaires et granuleuses.
TéléchargerMarble, Sandstone, Rough Surface, Polished Stone et plus — le prestige de la pierre sans la contrainte du poids.
TéléchargerStone Ridged, Oman Linear Stone, 3D Papel — reliefs sculptés et textures tridimensionnelles saisissantes.
TéléchargerClean, dry and flat surface. Dust down the wall. For a facade, apply a bonding primer if the substrate is porous or painted.
Use an angle grinder with a diamond disc or a circular saw. Decorative face upwards. Caution: the material is fragile, handle with care.
Apply exterior tile adhesive (e.g. Flex 206) with a notched trowel on the substrate. Also apply adhesive to the back of the panel. The suction effect guarantees a perfect bond.
Press the panel firmly. Check level. Use spacers if you plan on joints. Open time: follow the adhesive manufacturer's instructions.
Depending on the model: edge to edge (fine travertine) or coloured epoxy/silicone joint matched to the panel (relief models). Clean off excess before drying.
Flex 206 or exterior-certified equivalent. Frost-resistant, waterproof and UV-resistant. Always verify compatibility with the substrate.
The very thin profile of the travertine is ideally installed with no visible joint. The natural lines of the stone create the visual separations.
For Artstone and relief stone models (brick, rigato type), use a silicone or epoxy joint in the same colour as the panel. Homogeneous and watertight result.
Gently curve by pressing the panel. No heat required. Work progressively; the material is fragile but flexible.
Aluminium profiles are currently not suitable for outdoor use (moulds vary by 2 to 5mm per model). Finishing achieved through joints or mitre cuts.
Edge-to-edge installation. The very thin profile of the travertine and its natural veins make the joint invisible. Monolithic and elegant result.
Two-component epoxy tile grout, waterproof and UV-resistant. Choose a colour matching the panel. Apply with a rubber squeegee.
For expansion joints at corners or floor level: neutral silicone in the colour of the panel. Allows thermal movement without cracking.
Request your PHOMI eCovering quote or visit the showroom to see the samples.